-
Upon receipt of all used network equipment,
an overall physical inspection is given to ensure no damage
occurred during shipment.
-
Empty chassis are populated to capacity with
known functional blades to ensure all slots, power receptacles,
and connectors are functional.
-
Match all internal and external serial
numbers. (Any units found deficient are returned to the seller).
-
Make sure that all manufacturer markings and
labels are intact. (Any units found deficient are returned to
the seller).
-
All units that do not have their tamper
stickers intact, or are broken, will be opened and heavily
scrutinized.
-
To check thermo problems, all equipment is
allowed to warm up to normal operating temperature before any
further diagnostics are performed.
-
Inspection for missing screws or mounting
brackets - and if needed, we fix or replace them.
-
All hot swappable cards, power supplies, and
modules are tested to ensure they do not leave you with down
time in the event you ever need to change a faulty component.
-
All equipment is powered and run at all
input voltage capabilities.
-
Internal diagnostics they are performed and
the results are recorded and a copy is included with the unit.
-
All switches have every port individually
tested.
-
All redundant systems are put through fail
over tests to verify reliability.
-
All equipment is configured and tested under
real conditions to insure proper operation. This includes all
layer 2, 3, and 4 protocols that the unit is designed to
support.
-
Upon completion of test, equipment is
thoroughly cleaned and packaged for stock.
